Catalog — Electric

NeXGen™ Capacitor Controls

Request a Quote
Request a USER MANUAL

Electric Distribution Hardware

NeXGen™ CCURX Capacitor Control  Receiver

Classic design, with contemporary functionality, the Telescada NeXGen™ CCURX Capacitor Control Expandable Radio Receiver is a powerful, flexible and expandable solution for wireless distributedcapacitor control. The NeXGen™ CCURX highly sensitive double superheterodyne VHF receiver allows the NeXGen™ CCURX to operate via classic broadcast AFSK radio tones.

When it’s time to go 2-Way, the NeXGen™ CCURX provides users with a core of 8 configurable analog and 4 digital status inputs for monitoring and a dedicated AC line voltage measurement input accurate to +/- 1% @ 117VAC. Plug in a 2-Way transceiver and the NeXGen™ CCURX communicates with distributed capacitor control SCADA programs via DNP3 or MODBUS protocolsol

To complete the NeXGen™ CCURX Capacitor Control System Telescada has reinvented the handheld test transmitter for field and bench testing of AFSK control recevier instrumentsThe ToneGen™ Tablet Transmitter is a compact VHF transmitter with an integrated bluetooth transceiver. The ABS dock for the ToneGen™ Tablet Transmitter is designed to accomodate a standard 10″ Tablet computer.ToneGen™ is a Windows based test program designed to run on any Windows based PC, Laptop or Tablet. A clean and simple graphic interface allows field technicians to quickly communicate with and test the NeXGen™ CCURX Capacitor Control

Telescada also supports existing legacy Tone control systems with our Telescada PCIe ToneGen™ DNP to AFSK Protocol Tone Generator. The ToneGen™ takes DNP outputs from our UtiliSCADA™ Capacitor Control Service software and converts them into the appropriate AFSK protocol (SA-205, SA-206, REMS, FP-11) for radio braodcast.

 NeXGen™ CCU Remote Wireless Capacitor Controller

The Telescada NeXGen™ CCU Remote Wireless Capacitor Controller is a powerful, flexible and economical solution for 2-Way wireless distributed capacitor control, status monitoring and alarming. The NeXGen™ CCU meets the needs of distribution engineers for the monitoring and control of new distribution capacitor banks or the upgrade of limited capability local controllers or one-way switches. The NeXGen™ CCU provides users with a core of 8 configurable analog and 4 digital status inputs for monitoring. The NeXGen™ CCU dedicated AC line voltage measurement input is accurate to +/- 1% @ 117VAC. The NeXGen™ CCU can also transmit data from an IED (intelligent electronic device), or smart meter via its RS-232 serial communications link. The NeXGen™ CCU communicates with distributed capacitor control SCADA programs via DNP3 or MODBUS protocols

  • Integrated VHF Receiver
  • High Sensitivity Double Superheterodyne
  • VHF Frequency Programmable
  • 12.5KHz Narrowband
  • LED lightbar Indicator for Signal Reception and Decoding Confirmation
  • Legacy Protocol Support
    • TS-11 (Conforms to Fisher Pierce 11-Bit)
    • REMS 101
    • REMS 102
    • SA Digital
  • Local Controls & Feedback Indicators
  • High Brightness External RED/GREEN State LED
  • High Brightness External Fault LED
  • Local TRIP/CLOSE Pushbuttons
  • Local SCADA Lock-Out Switch
  • Optional Mechanical Counter
  • 120VAC Input Supply
  • 8 x 8 x 4 NEMA 4X Enclosure
  • 4 or 6 Stab Socket or Pole Mount Options
  • DNP3
  • MODUS RTU/ASCII 16 & 32 ort
  • Autonomous Control Functions
    • Programmable Voltage Override
    • Programmable Temperature Override
    • Programmble Time of Day Override
    • Programmable Single Phase VAR Override
  • Analog Inputs
    • 6 (six) Analog Inputs
    • 2 (two) 0-10VAC Analog Inputs for Neutral Current Monitoring and Control
    • 1 (one) Dedicated Single Phase AC Line Voltage Input
    • Data and Event Recording on Each Channel
  • Digital Inputs
    • 4 (four) Optically Isolated Digital Inputs
    • Data and Event Recording on Each Channel
  • Capacitor Bank Control Relays
    • 2 (two) Integrated Relays – TRIP / CLOSE
    • 30A Amps Resistive @ 240VAC
  • Configurable TRIP/CLOSE Timing
  • Configurable Safety Timer
  • Configurable Manual CLOSE Delay Timer
  • Digital Counter with Data Recording
  • Expandable Communications
    • 1 (one) Ethernet Port
    • 1 (one) RS-232/RS-485 IED Communications Port
    • 1 (one) USB Local Communications/Maintenance and Configuration Port

Gas Catalog

Gas Distribution Hardware

NeXGen™ GCU and GCU-247 — Gas Control Units for distribution monitoring, alarming and SCADA point integration.

View Gas Catalog →

SCADA Software

Electric & Gas SCADA Software

UtiliSCADA™ — 3rd Generation Master Controller for SCADA, VOLT/VAR, Demand Response and AMI.

View SCADA Software →

Talk to an engineer

Need spec sheets or pricing?

Call us at any time to speak with a real live engineer, or contact us by e-mail for product information, quotations and/or product support. 781-562-0475 · sales.desk@telescada.com

Email Sales
All Contact Options